Repairs that disappear,
by hand.
MAX is Cosmetiwood for the hand: smooth, easily spreadable and built for spatula and putty-knife work. The same filler that runs on the line as PRO, perfect for individual repairs and touch-ups that finish exactly like the wood around them.
Before
After
Drag to reveal the repair
Full control by hand
Smooth and spreadable, so you place exactly the right amount and level it clean in one pass.
Disappears in the finish
Sands and takes stain and lacquer like the surrounding timber. No patch grinning through.
Ready to use
Water-based and pre-mixed. Open the cartridge, dose with Dispensa and go. No mixing, minimal waste.
Three moves to a flawless surface.
Prep
Make sure the wood is dry, clean and dust-free. Remove loose bark or fibres around the defect.
Fill
Dose MAX from the cartridge with Dispensa, then spread and smooth with a spatula. Build up in passes on larger defects.
Finish
Once dry, sand the thin film around the repair flush, then mill, brush and coat like the rest of the board.
Built for the bench.
Everything you need to spec MAX into your finishing process. Full detail in the SDS and TDS.
View documents (SDS / TDS)- Application
- Manual, spatula / putty-knife
- Dispensing
- Dispensa or cartridge gun
- Base
- Water-based, ready to use
- Shrinkage
- Very low
- Drying
- Touch-dry in minutes, sandable after hours
- Colour
- 8 shades, custom-matched for volume
- Packaging
- Aluminium cartridges, 6 × 2.5 kg / box
- Cleaning
- Water (before drying)
Pair MAX with the rest of the range.
Try MAX on your own repairs.
Order a sample and see how it sands, stains and disappears.
Repairs that disappear,
by hand.
MAX is Cosmetiwood for the hand: smooth, easily spreadable and built for spatula and putty-knife work. The same filler that runs on the line as PRO, perfect for individual repairs and touch-ups that finish exactly like the wood around them.
Before
After
Drag to reveal the repair
Full control by hand
Smooth and spreadable, so you place exactly the right amount and level it clean in one pass.
Disappears in the finish
Sands and takes stain and lacquer like the surrounding timber. No patch grinning through.
Ready to use
Water-based and pre-mixed. Open the cartridge, dose with Dispensa and go. No mixing, minimal waste.
Three moves to a flawless surface.
Prep
Make sure the wood is dry, clean and dust-free. Remove loose bark or fibres around the defect.
Fill
Dose MAX from the cartridge with Dispensa, then spread and smooth with a spatula. Build up in passes on larger defects.
Finish
Once dry, sand the thin film around the repair flush, then mill, brush and coat like the rest of the board.
Built for the bench.
Everything you need to spec MAX into your finishing process. Full detail in the SDS and TDS.
View documents (SDS / TDS)- Application
- Manual, spatula / putty-knife
- Dispensing
- Dispensa or cartridge gun
- Base
- Water-based, ready to use
- Shrinkage
- Very low
- Drying
- Touch-dry in minutes, sandable after hours
- Colour
- 8 shades, custom-matched for volume
- Packaging
- Aluminium cartridges, 6 × 2.5 kg / box
- Cleaning
- Water (before drying)
Pair MAX with the rest of the range.
Try MAX on your own repairs.
Order a sample and see how it sands, stains and disappears.