Documents
Documents
Download the official TDS & SDS. These documents apply to both CosmetiWood MAX and CosmetiWood PRO.
Documents
Documents
Download the official TDS & SDS. These documents apply to both CosmetiWood MAX and CosmetiWood PRO.
CosmetiWood PRO / MAX – Documentation
On this page you can consult both the Safety Data Sheet (SDS) summary and the Technical Data Sheet (TDS) for CosmetiWood PRO / MAX.
Summary of the Safety Data Sheet for CosmetiWood PRO / MAX. For full legal details, always consult the official SDS PDF.
1. Identification of the substance / mixture and of the company
- Product name: CosmetiWood – Wood Filler (PRO / MAX).
- Use: Wood filler for professional / industrial use only.
- Supplier: CSP Engineering bv, Stenehei 30/7, B-2480 Dessel, Belgium.
- Phone: +32 (0)14 37 77 52 | Email: office@csp-engineering.com
- Website: www.cosmetiwood.com
The mixture is supplied for industrial and professional users. The full Safety Data Sheet must be read before use.
2. Hazards identification
- Mixture is not classified as hazardous for physical or environmental hazards under Regulation (EC) No. 1272/2008.
- EUH208: Contains isothiazolinone preservatives. May cause an allergic skin reaction in sensitised individuals.
- Additional statements: EUH208, EUH210.
- General: P102 – Keep out of reach of children.
- Prevention: P271 – Use only outdoors or in a well-ventilated area.
- Disposal: P501 – Dispose of contents / container in accordance with local regulations.
- No substances ≥ 0.1% classified as SVHC.
- Does not meet PBT or vPvB criteria.
- No substances with identified endocrine-disrupting properties above 0.1%.
3. Composition / information on ingredients
The product is a mixture. Key identified components include:
- Calcium carbonate (CAS 471-34-1): approx. 50–100%.
- 1,2-Benzisothiazol-3(2H)-one (CAS 2634-33-5): < 0.008%.
- Mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1) (CAS 55965-84-9): < 0.0004%.
4. First aid measures
- In case of doubt or if symptoms persist, seek medical advice.
- Inhalation: Move to fresh air.
- Skin: Wash with soap and water.
- Eyes: Rinse cautiously with water. Seek medical attention if irritation persists.
- Ingestion: Rinse mouth. Do not induce vomiting. Seek medical attention.
5. Firefighting measures
- Suitable media: water spray or mist, foam, powder, CO₂.
- Unsuitable: do not use a direct water jet.
- Product itself is not highly flammable, but packaging may burn and release CO / CO₂.
6. Accidental release measures
- Ensure good ventilation. Avoid contact with skin and eyes.
- Prevent entry into drains, surface water or soil.
- Collect mechanically and clean residues with water and detergent.
7. Handling and storage
- Follow label and workplace safety instructions.
- Wash hands after handling; do not eat, drink or smoke during use.
- Restrict access to trained personnel only.
- Keep out of reach of children.
- Store in tightly closed original packaging.
- Store in a dry, frost-free place.
8. Exposure controls / personal protection
- Provide adequate ventilation, especially in enclosed areas.
- Eyes: safety goggles for splashes.
- Hands: chemical-resistant gloves (EN ISO 374-1).
- Skin: suitable work clothing; wash after use.
- Respiratory: normally not required with proper ventilation.
9. Physical and chemical properties
- Form: paste.
- Colour: coloured, various shades.
- Odour: low.
- Boiling point: approx. 100 °C (water-based).
- Flash point: > 100 °C.
- Solubility: dispersible in water.
10. Stability and reactivity
- Stable under recommended storage and use conditions.
- Avoid extreme heat and uncontrolled mixing with incompatible materials.
11. Toxicological information
- Low acute toxicity expected based on data for components.
- Contains isothiazolinone preservatives which can cause allergic skin reactions.
12. Ecological information
- Not classified as hazardous to the environment as a mixture.
- Avoid uncontrolled release into soil, drains and surface water.
13. Disposal considerations
- Do not discharge into drains or the environment.
- Dispose of product and packaging via authorised waste contractors in line with local regulations.
14. Transport information
- Not classified as dangerous goods for transport (ADR, IMDG, IATA).
15. Regulatory information
- Classification and labelling according to Regulation (EC) No. 1272/2008 (CLP) and REACH.
16. Other information
This web summary does not replace the full Safety Data Sheet. The product is intended for industrial and professional users.
Key technical information about CosmetiWood PRO / MAX for production and processing.
TDS – Overview
CosmetiWood is a ready-to-use, water-based wood filler for repairing and finishing knots, cracks and other defects in solid wood, engineered flooring and veneer.
- CosmetiWood MAX – optimised for manual application with spatula or putty-knife.
- CosmetiWood PRO – optimised for automated filling in PAR-filler machines.
Main properties
- Excellent adhesion to wood and common wood glues.
- Very low shrinkage; defects remain filled over time.
- Can be sanded, brushed, milled and finished like wood.
- Good absorption and adhesion of finishing systems; natural look.
- Ready to use, no mixing, minimal waste.
Application – CosmetiWood MAX
- Ensure wood is dry, clean and dust-free; remove loose bark or fibres.
- For complex or small surfaces, build up in one or more passes as needed.
- Level off the surface; a thin layer around the defect can be sanded off later.
CosmetiWood MAX is supplied in aluminium cartridges. Use the DISPENSA dispenser or a suitable cartridge gun. After dosing, spread and smooth with a spatula.
Application – CosmetiWood PRO
- CosmetiWood PRO is designed for CSP Engineering PAR-filler machines.
- Automatic detection and filling of defects provides consistent quality.
- High viscosity ensures deep filling of large as well as fine cracks.
- Fast touch-dry time enables stacking without spacers after a short initial drying phase.
CosmetiWood PRO can also be applied manually where a higher viscosity filler is preferred. Application is similar to MAX but requires a bit more pressure when spreading.
Drying, sanding & finishing
- CosmetiWood dries by evaporation of water.
- Touch-dry after a short time (minutes). Sandable after several hours in open air. Longer time needed when boards are stacked.
- For industrial settings, drying parameters should be optimised in the line.
- After full drying, CosmetiWood can be sanded and machined like wood.
- Compatible with common industrial finishing products. Always test with your specific system.
Packaging & storage
- Supplied in aluminium cartridges.
- Typically packed as 6 cartridges of 2.5 kg in a box.
- Store in a cool, dry place.
- Protect from frost and direct sunlight.
- Keep cartridges closed when not in use.
Cleaning & safety
- Clean tools with water immediately after use.
- Once dried, remove residues mechanically.
For full safety and regulatory information, always consult the Safety Data Sheet (SDS) for CosmetiWood.
Contact & support
For detailed technical advice, line integration or customised settings, please contact CSP Engineering.
- Phone: +32 (0)14 37 77 52
- Email: office@csp-engineering.com
- Website: www.csp-engineering.com
CosmetiWood PRO / MAX – Documentation
On this page you can consult both the Safety Data Sheet (SDS) summary and the Technical Data Sheet (TDS) for CosmetiWood PRO / MAX.
Summary of the Safety Data Sheet for CosmetiWood PRO / MAX. For full legal details, always consult the official SDS PDF.
1. Identification of the substance / mixture and of the company
- Product name: CosmetiWood – Wood Filler (PRO / MAX).
- Use: Wood filler for professional / industrial use only.
- Supplier: CSP Engineering bv, Stenehei 30/7, B-2480 Dessel, Belgium.
- Phone: +32 (0)14 37 77 52 | Email: office@csp-engineering.com
- Website: www.cosmetiwood.com
The mixture is supplied for industrial and professional users. The full Safety Data Sheet must be read before use.
2. Hazards identification
- Mixture is not classified as hazardous for physical or environmental hazards under Regulation (EC) No. 1272/2008.
- EUH208: Contains isothiazolinone preservatives. May cause an allergic skin reaction in sensitised individuals.
- Additional statements: EUH208, EUH210.
- General: P102 – Keep out of reach of children.
- Prevention: P271 – Use only outdoors or in a well-ventilated area.
- Disposal: P501 – Dispose of contents / container in accordance with local regulations.
- No substances ≥ 0.1% classified as SVHC.
- Does not meet PBT or vPvB criteria.
- No substances with identified endocrine-disrupting properties above 0.1%.
3. Composition / information on ingredients
The product is a mixture. Key identified components include:
- Calcium carbonate (CAS 471-34-1): approx. 50–100%.
- 1,2-Benzisothiazol-3(2H)-one (CAS 2634-33-5): < 0.008%.
- Mixture of 5-chloro-2-methyl-4-isothiazolin-3-one and 2-methyl-2H-isothiazol-3-one (3:1) (CAS 55965-84-9): < 0.0004%.
4. First aid measures
- In case of doubt or if symptoms persist, seek medical advice.
- Inhalation: Move to fresh air.
- Skin: Wash with soap and water.
- Eyes: Rinse cautiously with water. Seek medical attention if irritation persists.
- Ingestion: Rinse mouth. Do not induce vomiting. Seek medical attention.
5. Firefighting measures
- Suitable media: water spray or mist, foam, powder, CO₂.
- Unsuitable: do not use a direct water jet.
- Product itself is not highly flammable, but packaging may burn and release CO / CO₂.
6. Accidental release measures
- Ensure good ventilation. Avoid contact with skin and eyes.
- Prevent entry into drains, surface water or soil.
- Collect mechanically and clean residues with water and detergent.
7. Handling and storage
- Follow label and workplace safety instructions.
- Wash hands after handling; do not eat, drink or smoke during use.
- Restrict access to trained personnel only.
- Keep out of reach of children.
- Store in tightly closed original packaging.
- Store in a dry, frost-free place.
8. Exposure controls / personal protection
- Provide adequate ventilation, especially in enclosed areas.
- Eyes: safety goggles for splashes.
- Hands: chemical-resistant gloves (EN ISO 374-1).
- Skin: suitable work clothing; wash after use.
- Respiratory: normally not required with proper ventilation.
9. Physical and chemical properties
- Form: paste.
- Colour: coloured, various shades.
- Odour: low.
- Boiling point: approx. 100 °C (water-based).
- Flash point: > 100 °C.
- Solubility: dispersible in water.
10. Stability and reactivity
- Stable under recommended storage and use conditions.
- Avoid extreme heat and uncontrolled mixing with incompatible materials.
11. Toxicological information
- Low acute toxicity expected based on data for components.
- Contains isothiazolinone preservatives which can cause allergic skin reactions.
12. Ecological information
- Not classified as hazardous to the environment as a mixture.
- Avoid uncontrolled release into soil, drains and surface water.
13. Disposal considerations
- Do not discharge into drains or the environment.
- Dispose of product and packaging via authorised waste contractors in line with local regulations.
14. Transport information
- Not classified as dangerous goods for transport (ADR, IMDG, IATA).
15. Regulatory information
- Classification and labelling according to Regulation (EC) No. 1272/2008 (CLP) and REACH.
16. Other information
This web summary does not replace the full Safety Data Sheet. The product is intended for industrial and professional users.
Key technical information about CosmetiWood PRO / MAX for production and processing.
TDS – Overview
CosmetiWood is a ready-to-use, water-based wood filler for repairing and finishing knots, cracks and other defects in solid wood, engineered flooring and veneer.
- CosmetiWood MAX – optimised for manual application with spatula or putty-knife.
- CosmetiWood PRO – optimised for automated filling in PAR-filler machines.
Main properties
- Excellent adhesion to wood and common wood glues.
- Very low shrinkage; defects remain filled over time.
- Can be sanded, brushed, milled and finished like wood.
- Good absorption and adhesion of finishing systems; natural look.
- Ready to use, no mixing, minimal waste.
Application – CosmetiWood MAX
- Ensure wood is dry, clean and dust-free; remove loose bark or fibres.
- For complex or small surfaces, build up in one or more passes as needed.
- Level off the surface; a thin layer around the defect can be sanded off later.
CosmetiWood MAX is supplied in aluminium cartridges. Use the DISPENSA dispenser or a suitable cartridge gun. After dosing, spread and smooth with a spatula.
Application – CosmetiWood PRO
- CosmetiWood PRO is designed for CSP Engineering PAR-filler machines.
- Automatic detection and filling of defects provides consistent quality.
- High viscosity ensures deep filling of large as well as fine cracks.
- Fast touch-dry time enables stacking without spacers after a short initial drying phase.
CosmetiWood PRO can also be applied manually where a higher viscosity filler is preferred. Application is similar to MAX but requires a bit more pressure when spreading.
Drying, sanding & finishing
- CosmetiWood dries by evaporation of water.
- Touch-dry after a short time (minutes). Sandable after several hours in open air. Longer time needed when boards are stacked.
- For industrial settings, drying parameters should be optimised in the line.
- After full drying, CosmetiWood can be sanded and machined like wood.
- Compatible with common industrial finishing products. Always test with your specific system.
Packaging & storage
- Supplied in aluminium cartridges.
- Typically packed as 6 cartridges of 2.5 kg in a box.
- Store in a cool, dry place.
- Protect from frost and direct sunlight.
- Keep cartridges closed when not in use.
Cleaning & safety
- Clean tools with water immediately after use.
- Once dried, remove residues mechanically.
For full safety and regulatory information, always consult the Safety Data Sheet (SDS) for CosmetiWood.
Contact & support
For detailed technical advice, line integration or customised settings, please contact CSP Engineering.
- Phone: +32 (0)14 37 77 52
- Email: office@csp-engineering.com
- Website: www.csp-engineering.com